Availability: | |
---|---|
① Push Button Code
② Design Serial Number
③ NO Contact Number
④ NC Contact Number
⑤ Flush Push Button
⑥ New Models
◒ Rated Insulation Voltage : 600V
◒ Rated Thermal Current : 10A
◒ Switch Rating : AC-15 Ue : 380V/250V, Ie=4.5A
DC-13 Ue : 220V/110V, Ie=0.6A
◒ Contact Resistance : ≤50 mΩ
◒ Recommended Torque : 0.9 Nm
◒ Electrical Life : ≥30X104 times
◐ Working Environment Temperature : -25°C ~ +70°C
◐ Storage Temperature : -40°C ~ +70°C
◐ Class Of Pollution : 3
◐ Protection Grade : IP40/IP65/IP66
◐Limit Height : ≤2000M
◐ Standard : EN 60947-1,GB14048.5
◀ NO Contact : Normally, it is in the off state. The circuit is connected after the switch is operated.
◀ NC Contact : Normally, it is connected. The circuit is disconnected after the switch is operated.
◀ 2 NO : Connect two sets of circuits separately. The contacts are usually disconnected. Both sets of circuits are connected after the switch is pressed.
◀ 2 NC : The contacts are usually in the on state. After the switch is operated, both sets of circuits are disconnected.
◀ 1NO&1NC : The contacts are connected to two groups of circuits respectively. If no action is taken, one group is disconnected and the other group is connected. If the switch is operated, the disconnected contact will be closed while the connected one will be opened.
① Push Button Code
② Design Serial Number
③ NO Contact Number
④ NC Contact Number
⑤ Flush Push Button
⑥ New Models
◒ Rated Insulation Voltage : 600V
◒ Rated Thermal Current : 10A
◒ Switch Rating : AC-15 Ue : 380V/250V, Ie=4.5A
DC-13 Ue : 220V/110V, Ie=0.6A
◒ Contact Resistance : ≤50 mΩ
◒ Recommended Torque : 0.9 Nm
◒ Electrical Life : ≥30X104 times
◐ Working Environment Temperature : -25°C ~ +70°C
◐ Storage Temperature : -40°C ~ +70°C
◐ Class Of Pollution : 3
◐ Protection Grade : IP40/IP65/IP66
◐Limit Height : ≤2000M
◐ Standard : EN 60947-1,GB14048.5
◀ NO Contact : Normally, it is in the off state. The circuit is connected after the switch is operated.
◀ NC Contact : Normally, it is connected. The circuit is disconnected after the switch is operated.
◀ 2 NO : Connect two sets of circuits separately. The contacts are usually disconnected. Both sets of circuits are connected after the switch is pressed.
◀ 2 NC : The contacts are usually in the on state. After the switch is operated, both sets of circuits are disconnected.
◀ 1NO&1NC : The contacts are connected to two groups of circuits respectively. If no action is taken, one group is disconnected and the other group is connected. If the switch is operated, the disconnected contact will be closed while the connected one will be opened.
content is empty!