① Push Button Code
② Design Serial Number
③ NO Contact Number
④ NC Contact Number
⑤ ZS: Emergency Stop Push Button
MAIN TECHNICAL DATA
Rated value of switch:
AC-15 36V/10A 110V/10A 220V/5A 380V/2.7A 660V/1.8A
DC-13 24V/4A 48V/4A 110V/2A 220V/1A 440V/0.6A
◒Conventional thermal current: Ith10A
◒Contact resistance: ≤50mΩ
◒Insulation resistance: ≥10mΩ
◒Mechanical life:
◒Common push-button ≥100×104 times
◒Selector button ≥30×104 times
◒Key push-button ≥5×104 times
◒Emergency push-button ≥5×104 times
WORKING ENVIRONMENT
◒Ambient air temperature -25~+40°C
◒Limit height: ≤2000m
◒Relative air humidity: ≤90%
◒Pollution degree: Class3
◒Protection grade:IP40/IP65
CHARACTERISTICS
◀ Rugged & Cost-effective
◀ Well-chosen Materials & Exquisite Craftsmanship
◀ Comfortable & Durable
◀ Inexpensive & Simple And Practical
◀ Snap Structure, Easy To Install
EXPLANATION OF PROFESSIONAL TERMS
◀ NO Contact : Normally, it is in the off state. The circuit is connected after the switch is operated.
◀ NC Contact : Normally, it is connected. The circuit is disconnected after the switch is operated.
◀ 2 NO : Connect two sets of circuits separately. The contacts are usually disconnected. Both sets of circuits are connected after the switch is pressed.
◀ 2 NC : The contacts are usually in the on state. After the switch is operated, both sets of circuits are disconnected.
◀ 1NO&1NC : The contacts are connected to two groups of circuits respectively. If no action is taken, one group is disconnected and the other group is connected. If the switch is operated, the disconnected contact will be closed while the connected one will be opened.
PARAMETRIC DIAGRAM
FAQ
- Q: What Is An Emergency Stop Push Button?
- A: “An exigency stop drive button switch is used as a safety measure to stop dangerous corridor (loads). An Exigency Stop Switch must be largely visible in color and shape, and must be easy to operate in exigency situations .”
- Q:What Is The Function Of An Emergency Stop Push Button?
- A: The emergency stop push button is a safety mechanism used to shut down the machine in an emergency when it cannot be shut down in the usual way. The purpose of this kind of push button is to quickly stop the machine if there is a risk of injury or if the work flow needs to be stopped. And this kind of push button is designed to avoid injury or reduce existing hazards to people, machinery or work. Thus, people also call it a safety push button switch or push button safety switch.
- Q:How do I use the emergency stop button?
- A:“The emergency stop button usually uses its normally closed function. In case of an emergency, just press the switch head to make the device stop immediately.Rotate to release the red head and restart the device.”