The digital voltage ampere meter uses a high-precision analog-to-digital converter (ADC) to measure voltage and current, and can accurately measure actual voltage and current values. The LED digital tube display can clearly display the voltage and current values, making it easy for users to read.
The digital ammeter can be controlled through buttons to set and adjust different parameters to meet the different needs of users. It has functions such as overload protection , which can effectively protect the safety of the circuit under test and the instrument itself.
The digital panel meter adopts a compact and lightweight design, making it easy to carry and use
LED digital display voltage and ammeter are widely used in various occasions where voltage and current need to be measured, such as laboratories, industrial production sites, etc. It can provide accurate measurement results, and has the advantages of easy use, simple operation, and intuitive reading.
① Housing style classification
② Panel style classification
③ Product classification
| M | M1 | M2 |
| Multi-function meter | Multi-display meter | Voltage and currentpatrol meter |
| A1 | V1 | VA |
| Current single display meter | Voltage single display meter | Voltage and current double display meter |
| A3 | V3 | |
| Three-phase Ammeter | Three-phase voltmeter |
④Working Power Supply
Power Supply (Transformer)
◆T1-AC-220V, 50/60HZ;
◆T2-AC-380V,50/60HZ
Switching power supply
◆S1 AC/DC-20~60V;
◆S2 AC/DC-80~260V
⑤Communication
R:RS485(MODBUS) Blank Non Communication
⑥Control Output
| T | M |
| main control output SSR (DC12V) | main control switch output (relay) |
| V | A |
| voltage analog output (0~10V) | current analog output (4~20mA) |
| 1 | 2 |
| 1-wayout output (single relay) upper limit output | 2-way output (double relay) upper limit+lower limit output |
| 0 or empty | |
| No control output |
⑦Input Signal
| CT: Current measurement range | 0~10A | |
| The measuring range can be expanded determined by the parameters of external transformer (Variable ratio is adjustable,the default value is1) | ||
| CT1:Current measurement range | 0~100A | |
| Fixed measuring range External transformer with transformation ratio of1000/1 (variable ratio is not adjustable) | ||
| PT | PT1 | |
| Voltage Transformer (built-in) | Voltage Transformer (external) | |
| BTS1 | ||
| Current Divider (external) | ||
⑧Control Output Remarks For Special Measuring Range (When the transformer is external, the variable ratio is marked here.)
⑨Function Customization (The function code is a 3-bit combination number)
Working Environment
◎Air Pressure: 86 – 106kPa
◎Relative Humidity:45 – 85% RH
Main Technical Parameters
◎The factory default of M1 multi-display meter is ammeter.When there is no signal input at the current detection end and there is signal input at the voltage detection end, the meter will automatically switch to voltmeter. If there is signal input at both ends, the preferred option is ammeter.
◎Maximum Power Consumption Of Instrument : 6W
◎Frequency Range Of Measurement Input Signal : 10~99.9Hz (factory default)
◎The Sampling Rate : about 100mS
◎The Measurement Accuracy : + 0.5%
◎Environment : the temperature is -30~55℃ and the humidity is ≤ 85% RH without corrosion
◎Contact Capacity Of Alarm Output Relay : 3A-AC250V/DC30V
Product Appearance And Installing Size (mm)
| Specifications | External dimension | Panel hole dimension |
| Height*width*depth | Height*width | |
| M2££- | 48*48*66 | 46*46 |
| M5££- | 48*96*66 | 46*92 |
| M6££- | 72*72*66 | 67*67 |
| M8££- | 80*80*66 | 76*76 |
Panel Style
Dark Border Panel
Dark Panel
Digital Display Meter Drawing
