Skip to content 
①AD116 Series
②Installing size of neck
③ Adjust Speed Potentiometer （Big knob）
| Electrical Characteristics | Range of nominal resistance | 5Ω~2MΩ |
| Resistance tolerance | ±10%±5% (customization) | |
| Terminal resistance | ≤±1%R or 2Ω | |
| Contact resistance variation (CRV) | ≤±1%R or 3Ω | |
| Insulation resistance | ≥ 1GΩ (100V AC) | |
| Withstand voltage | 101.3 KPa 500V; 8.5 KPa 350V |
Environment Characteristics | Rated power | 0.5W ( 250V max) |
| Temperature range | -55°C~+125°C | |
| Temperature Coefficient | ±250, ±100ppm/°C | |
| Collision (390m/S2, 4000 times) | ΔR≤±1%R | |
| Vibration (10-500HZ, 0.75mm, 6h) | ΔR≤±1%R, ΔUab/Uac≤±2%R, Electrical break≤100μS | |
| Temperature variation (-55°C/30min,+125°C/30min, 5 cycles) | ΔR≤±2%R,ΔUab/Uac≤±2%R | |
| Climate category (IEC68-2-2) | ΔR≤± (5%R+0.1Ω),Insulation Resistance≥100MΩ | |
| Electrical endurance (0.5W, 1000h) | ΔR≤± (5%R+0.1Ω),CRV≤±3%R or 5Ω | |
| Mechanical endurance (200 cycles | ΔR≤± (10%R+0.5Ω), CRV≤±3%R or 5Ω | |
| Steady damp heat (IEC68-2-3, Ca, 96h) | ΔR≤± (5%R+0.1Ω), Insulation Resistance≥100MΩ |
Physical Characteristics | Total mechanical travel | 260°±5° |
| Mounting Hole Diameter | 22mm | |
| Water proof | IP65 |
PARAMETRIC DIAGRAM
