① Time Relay

② Panel style classification

③T1: Single Relay

T2:Double Relay

Introduction to Panel Functions:

MAIN TECHNICAL PARAMETERS

Timing Digit Count:	4 digit
Timing Mode:	Count-Up/ Count-Down
Input Signal:	Contact Signal
Signal input pulse width:	≥30mS
Delay Range:	0.01S-99.9S/0.1S-999.9S/1S-9999S
	0.01M-99.9M/0.1M-999.9M/1M-9999M
	0.01H-99.9H/0.1H-999.9H/1H-9999H
Output Mode:	P1-PN (Single relay refers to Table 1)P1-PN (Dual relavs referto Table 2)
Output mode:	Relay contact output
Rated control power supply voltage Us(V) frequency	AC/DC100V-240V(50/60)Hz
Allowable fluctuation range of rated control power supply voltage	85%Us-110%U
Agreed free air heating current th(A)	5A
Category of use under rated working voltage	AC-15    AC-15   DC13   AC-15  DC13
Rated working voltage u (v)	AC240V  AC415V  DC220V  AC/DC12V-48V
Rated working current le(A	0.75A     0.47A   0.27A        0.5A
Rated isolation voltage Ui(V)	415V
Rated impulse withstand voltage Uimp(V)	4KV
Enclosure protection grade	IP20
Class of pollution	3 degree
Maximum value of short circuit protection	6A
Electrical and mechanical life (ten thousand times))	10/100

Product Features:

Independent and easy to-operate interface: Dual channel time parameters (TI/T2) are displayed and set in separate zones, with a clear key layout for

efficient and convenient on-site debugging.

Exquisite appearance: Compact industrial panel design with high-brightness LED display, ensuring clear readability and higher visual recognition in both

strong and weak light environments.

Functional diversity: Supports count up/count down (D/N) mode switching, with functions such as pause (GAT), reset (RST), and key lock (LOCK KEY,

adapting to various sequential control scenarios.

Stable quality. Adopts imported chips with electrical isolation between signal and output, featuring strong anti-interference capability and reliable operation

Precautions for installation:

◎Excessive dust, salt, or metal powder;

◎Corrosive and flammable gas;

◎Direct vibration or impact on the main structure;

◎Water, oil, chemical, smog or steam pollution;

◎A sharp change in environmental humidity may cause condensation;

◎Direct air conditioning, direct sunlight, heat radiation accumulation.

Terminal Wiring Diagram:

Time Relay Drawing