The signal light indicator is a device used to communicate with other drivers. It provides information about the driver’s intention and helps others take appropriate action.
· Automotive turn signal lights
· Traffic lights
The first signal light car was introduced in the late 1800s, and they were used to indicate the direction of traffic. These days, they also show if a vehicle is turning left or right, has its hazard lights on, or indicates a right turn by flashing its right-hand indicator.
A big part of being a safe driver is being able to inform other motorists of your intentions. Signaling lights are both at the frontal and rear part of the vehicle and are sometimes also called “blinkers” and “signal light indicators.” Depending on the side you flicked on, your car will indicate whether you’re turning left or right.
Start and stop button switch, generally used for start and stop. Generally, there are green, red, yellow and so on. We usually use the green button as start, the red button as stop, and the yellow button as jog.
In fact, their internal structure is the same.
See the start, pass, and reset in the first picture for the physical picture. The start and reset buttons are different from the pass button. The start and reset buttons are push button switches with indicator lights. The physical contact diagram is as follows:
The core of industrial control is the control of the motor, the core of the motor control is the contactor, the conventional component of the contactor coil control is the button switch, today we will take the button switch of GQELE Electric as an example, briefly introduce the function of the button switch in the second Function, use and installation in control loops.
Installation category
This series of buttons are φ22mm panel mounting buttons, and the panel mounting holes are φ22.7mm~φ22.3mm. Standard buttons can use 1~6mm thick mounting panels, and economical buttons can use 1~4mm thick mounting panels.
